Expotech USA, Inc.

Home

Total Nitrogen Analyzer by APS

Specifications
APS Total Nitrogen Analyzer
  • Sample Type: Gases, LPG, Liquids
  • Analytical Range: 0.1 to 1,000 ug S/mL, without dilution
  • Precision: ±1.0 to 10%, dependent on concentration and matrix
  • Sample Size: 1 to 100 uL, dependent on concentration and matrix
  • Analysis Time: 1 to 10 minutes, dependent on concentration and matrix
  • Gases: Oxygen, 99.7% minimum purity, dry Argon or Helium, 99.9% minimum purity, dry (gas purifiers recommended for all gases)
  • Power: Stable 115 VAC or 230 VAC, 50/60 Hz, 1800 Watts
  • Dimensions: 1000 mm Wide x 500 mm Deep x 500 mm High (including computer)
  • Weight: Less than 50 kg (including computer)

Typical ApplicationsHardware
  • Crude Oils
  • Cutting Oils
  • Diesel Fuels
  • Distillates
  • Gas Oils
  • Process Water
  • Gasoline
  • Grease
  • Hydrocarbon Gases
  • Petroleum Additives
  • LPG
  • Urine
  • Lube Oils
  • Natural Gas
  • Recyled Oils
  • Refinery Feedstocks
  • Waste Oils
  • Waste Water
  • The APS 35 Total Nitrogen Analyzer is the most technologically advanced elemental analyzer on the market today. The analytical system consists of three modular components: the High-Temperature Furnace; the Electrochemical NO Detector; and the APS 35 Elemental Workstation.
  • The APS 35 Furnace Module includes a high-temperature vertical combustion zone, unique quartz combustion tube, mass flow control, and state-of-the-art electronics. The design and physical placement of hardware and electronic components provides for rapid and efficient sample combustion and maintenance.
  • The APS 35 Electrochemical NO Detector includes a gas diffusion chamber, 3-electrode titration cell, and a micro-volume Detection Chamber. This innovative design and integration of hardware and electronic components provides for rapid, efficient, and accurate analyses.

Top of Page

© Expotech USA, Inc., 1996.