Multi Function Testers 6020/6030   • Water resistant (IEC60529 IP57) • Test leads are stored in a cord reel module • Easy-to-read large digital display • The instrument automatically turns itself off in about 30 minutes to conserve battery life, if no push buttons are pressed. • Illumination on test probes for work at night or in dimly lit locations • Display back-light to improve legibility in poor lighting conditions • Autoranging; three ranges for insulation resistance, two ranges for earth resistance and two AC voltage ranges • The instrument and all accessories in one carrying case • AC voltage range;   • True RMS sensing permits accurate measurement of voltage with distortion and harmonics generated by equipment using SCRs or TRIACs. • Insulation resistance range;   • Three test voltages; Model 6020 (125V, 250V, 1000V) • Three test voltages; Model 6030 (250V, 500V, 1000V) • 1mA test current at the minimum load. • Automatically releases electric charges stored in the circuit under test. • Remaining charges can be observed on AC voltage range • Remote control switch on a test probe • Earth resistance range;   • Checks resistance of auxiliary earth bars • Can make both simplified and normal measurement • Phase test;   • LEDs indicate whether phase sequence is correct or reversed as well as open phase, if any. • Rated voltage from 100V to 600V AC   6020 6030 6020/30 Insulation Test Specifications Test Voltage 125V/250V 250V/500V 1000V Measuring Ranges (MΩ) 0 ~1.999MΩ 1.00 ~19.99MΩ 10.0 ~199.9MΩ 0 ~19.99MΩ 10.0 ~199.9MΩ 100 ~1999MΩ (3 auto ranges) Accuracy |±2%rdg ±3dgt, ±10%rdg (on 1000~2000MΩ) Open Circuit Voltage +20% -0% of Rated Test Voltage Rated Test current 1mA DC +20%-0% Short Circuit current 1.3mA DC approx. Effect of AC Component of Terminal Voltage Within ±10% of reading when 5µF capacitor is connected in parallel on insulation test Overload Protection 1200V (DC + ACp-p) for 10 seconds Earth Resistance Test Specifications Measuring Ranges(Ω) 0 ~199.9Ω 100 ~1999Ω (2 auto ranges) Accuracy |±2%rdg ±3dgt (at 500Ω auxiliary earth resistance) Measuring Method By constant current inverter 820Hz approx. 2mA approx. Overload Protection 200V AC for 10 seconds between measuring terminals Voltage Test Specifications Measuring Ranges (V) 0 ~ 199.9/100 ~ 600V (2 auto ranges) Accuracy |±1%rdg ±4dgt Sensing True RMS Input Impedance 2MΩ Overload Protection 900V AC for 1 minute Phase Check Specifications Measuring Range 100 ~ 600V (50Hz/60Hz) (for checking correct or reverse phase and open phase) General Display 3 1/2(1999)digit large LCD Response Time Approx. 4 seconds for AC voltage and earth resistance tests Approx. 5 seconds for insulation resistance tests. Withstand Voltage 5550V AC for one minute Effect of Drop No electrical and mechanical damage shall occur when the unit is dropped from a height of 1 m onto the concrete floor. Effect of Temperature Readings shall not differ greater than specified below when taken at a reference temperature of 23ºC and varied temperature of 0ºC and 40ºC. AC Voltage 3% ±2 dgt insulation resistance and earth resistance 5% ±2 dgt Operating Temperature Range 0-40ºC Dimensions 130 × 238 × 207mm (main body plus cord reel module) 105 × 238 × 207mm (main body only) Weight Approx. 1.6kg (main body only) Approx. 750g (cord reel module only) Power Supply 1.5V LR6 alkaline battery or equivalent × 8 (for main body only) 1.5V LR6 alkaline battery or equivalent × 1 (probe only) Safety Standard IEC 61010-1 CAT.III 600V Pollution Degree 2 Optional 2417(Water Proof Leakage Clamp Meter) 7093(Cord for Extension Probe) 9080(Aluminum Carrying Case) * A full set (deluxe version complete with aluminum carrying case and leakage clamp meter) is available as Model 6020T or 6030T.

---

For more information, please contact ExpotechUSA
Shipping Address	Mailing Address	Phone	Web
10700 Rockley Road	10700 Rockley Road	281-496-0900 [voice]	Click here to e-mail us
Houston, Texas 77099	Houston, Texas 77099	281-496-0400 [fax]	ExpotechUSA's HomePage

---