| 5000/5001 |
THE
LEAKAGE CURRENT IS RECORDED BY 3CH INPUT
60,000 DATA IS RECORDED
60,000 data is recorded when 1ch
is used and when three all channels are used, 20,000 data is recorded
for each channel
 |
Marvelous,
continuous measurement time |
| • |
Standard type : About 25 days
(Model 5000) |
| • |
Long life type : About 40 days
(Model 5001) |
|
Data where it
doesn’t disappear even if battery is consumed |
| |
Data doesn’t disappear by
using the nonvolatile memory when the battery is consumed and the
battery is exchanged. (warranty for 10 years) |
|
Battery
residual display |
| |
The battery state is displayed
by 4 stages. (When blinking is displayed, it is possible to measure for
about one
day) |
|
The present
time, recording intervals, the start of recording, the recording
method, the name of monitoring site and the comment can be set by using
supplied software |
|
 |
|
Selection of
one time mode and endless mode |
| • |
| One time on |
Stop recording when the
memory is filled. |
|
| • |
| One time off
(endless) |
Overwrite from old data
and leave the latest data. |
|
|
Recall function |
| • |
The latest 10 data can be
checked. |
| • |
| The
recall data is |
Display
month and date
Display hour and minute
Display current value |
|
| |
|
|
|
|
 Measurements and precision(AC
50/60Hz) |
|
| Continuous recording mode |
|
| Range |
Measurement |
Accuracy |
Accuracy
of sensor combination |
| 100mA |
0 to 100.0mA |
|±1.0%rdg±5dgt |
|±2.0%rdg±10dgt |
| 1000mA |
0 to 1000mA |
|±2.0%rdg±6dgt |
|
Event recording mode / The maximum value recording
mode
| Range |
Measurement |
Accuracy |
Accuracy
of sensor combination |
| 100mA |
0 to 100.0mA |
|±1.5%rdg±7dgt |
|±2.5%rdg±12dgt |
| 1000mA |
0 to 1000mA |
|±2.5%rdg±8dgt |
|
Capture recording mode
*Accuracy of electric current adjudication is different. For details,
refer to the operation manual
| Range |
Measurement |
Accuracy |
Accuracy
of sensor combination |
| 100mA |
0 to 100.0mA |
|±3.0%rdg±2%fs |
|±4.0%rdg±2.5%fs |
| 1000mA |
0 to 1000mA |
|±4.0%rdg±2%fs |
|
| Operation
system |
Successive approximation |
| Input |
AC
Voltage(AC 100mV/A) |
| Maximum
Circuit Voltage |
AC
170mVrms, 250mV Peak value |
| Number
of input channel |
3
channels |
| Measurement
method |
True
RMS |
| Measurement
interval |
1,2,5,10,15,20,30
sec. / 1,2,5,10,15,20,30,60 min. |
| Over
Range Indication |
"OL"mark
appears when exceeding measuring range |
| Warning
of voltage of battery |
Battery
mark display of 4 stages |
| Battery
life |
5000
: about 25 days on the event record mode ( normal temp. )
5001 : about 40 days on the event record mode ( normal temp. ) |
| Insulation
resistance |
50MΩ
or more |
| Dimensions |
5000
: 111(L)×60(W)×36(D)mm
5001 : 111(L)×60(W)×42(D)mm |
| Weight |
5000
: about 255g(include batteries)
5001 : about 315g(include batteries) |
| The
maximum display |
1049
counts |
| Applicable
standards |
IEC
61010-1:2001 CAT.III 300V Pollution degree 2
IEC 61326(EMC Standard) |
| Power
Source |
5000
: Alkaline battery LR6 × 4
5001 : Alkaline battery LR6 × 6 |
| Accessories |
Instruction
Manual
Alkaline battery LR6
Softwear for making graphs(CD)
USB cable
9118(Soft Case) |
| Optional |
7147(Extension
Cable)
8141 / 8142 / 8143 (Leakage clamp sensor)
9119(Hard Case) |
|
|
|
