|
Traceable® Outlet Controller Complete
Description
Versatile and economical controller may be programmed to turn
equipment on and off at any minute of any day. A fail-safe memory
permits programming 14 different switchings per day. They may be
allocated over four separate weekly programs for up to 196 switchings
per week.
Easy to program
Schedule an entire week with the press of a few buttons. Switches
located on the front panel control the entire operation.
Set intervals from 1 minute to 168 hours
The Outlet Controller will turn equipment on and off in intervals as
short as 1 minute or as long as 168 hours. Turn an instrument on today
and off a week later. The A.M./P.M. day programs allow repeating the
same cycle every day of the week, weekdays only, weekends only, or any
selected days.
Battery backup
A manual override permits equipment to be switched on or off without
disturbing the program. Program and clock times are maintained by a
backup battery in the event of an electrical outage. Brilliant,
1/2-inch-high LCD shows the time of day, day, and event number.
Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable®
Certificate is provided from our ISO 17025 calibration laboratory
accredited by A2LA. It indicates traceability to standards provided by
NIST (National Institute of Standards and Technology). CSA-and NTRL-C
rated unit controls equipment to 125 VAC, 50/60 Hz, 15 amps, 1850 watts
with a timing accuracy of 0.01%. Supplied with two 1.5-volt batteries.
High-impact ABS plastic case is 2 x 4 x 3-1/2 inches. Weight is 5-1/2
ounces. Replacement battery Cat. No. 1102.
Control Cat. No. 5090 Traceable®
Outlet Controller
|
