|
Hour/Day Dial Controller Complete Description
Automatic mechanical units turn on and off any piece of
equipment. Use them to turn on chemical, water, and air pumps as part
of a sampling process. Automate testing, heating, mixing, or even
feeding of animals.
Easy-to-set controllers are ready to use out of the box,
program in less than a minute, and plug into a wall outlet. They have
all of the flexibility and simplicity desired for a lab's routine needs.
Index pin displays all time settings
Unique index pin memory permits programming the unit to exact time
requirements. Pins constantly display all of the time settings. UL
listing allows use with electrical equipment to 125 VAC, 15 amps, 1875
watts, and 1/3 horsepower.
A single glance verifies an entire program. If a change is
necessary, it takes only a second to raise or lower a pin.
Simple, easy programming
Twenty-four-hour unit may be set in any number of 15-minute increments,
7-Day Controller in any number of 2-hour increments.
Both automatically repeat each cycle daily or weekly. The
7-day unit may be programmed to skip weekends or any days. Using the
manual override, equipment can be switched on/off immediately without
unplugging your instrument and without disturbing the program. UL
listed and rated to 15 amps. Size is 3-1/4 x 2-3/4 x 2 inches. Weight
is 5 ounces.
Control Cat. No. 5060 24 Hour
Dial Controller
Control Cat. No. 5070 7-Day
Dial Controller
|
