|
Traceable® Walkaway™ Count-up Controllers Complete
Description
Model 1: Walkaway™ Turn-off Controller counts up and
turns any piece of equipment off at the end of a set time period.
Programmable in three interval settings: .01 second to 99.99 seconds; 1
minute to 9999 minutes; or 1 hour to 9999 hours.
Model 2: Walkaway™ Repeat Turn-on/Turn-off
Controller counts up and turns any piece of equipment on for a
programmed time and off for a different programmed time. Repeat feature
automatically continues cycling on and off programmed times until
manually stopped. Programmable for separate on and off timing periods
in three interval settings: 1 second to 99 seconds; 1 minute to 99
minutes; and 1 hour to 99 hours.
Switch equipment on/off instantly with manual override
Controllers perform reproducible stirring, heating, or pumping times.
Use for timed shutdown or repeated on/off timing during any test. A
manual pause switch overrides the program without disturbing it, and
permits equipment to be switched off instantly. Supplied internal nicad
battery maintains programs in the event of a power outage. Intuitive
operation permits setting a program in less than five seconds.
Automatic operation allows walking away from the equipment.
Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable®
Certificate is provided from our ISO 17025 calibration laboratory
accredited by A2LA. It indicates traceability to standards provided by
NIST (National Institute of Standards and Technology).
LED indicates status of attached equipment
Unit’s timing accuracy is 0.01%. LCD digit height is 1/2-inch.
Three-pronged grounded receptacle relay turns on/off apparatus to 120
VAC, 15 amps, 1800 watts, 1/3 horsepower. Red LED indicates the on/off
status of attached equipment. High-impact ABS case is 6 x 2-3/4 x 3-1/4
inches. Weight is 12 ounces.
Control Cat. No. 5057 Traceable®
Walkaway™ Turn-off Controller (pictured above)(Patent
Pending)
Control Cat. No. 5058 Traceable®
Walkaway™ Repeat Turn-on/Turn-off Controller (pictured below)(Patent
Pending)
|
