|
Traceable® Timer Switch Controller Complete
Description
Program up to 196 switchings per week
An "always remember" memory permits programming 14 different switchings
per day, which may be allocated over four separate weekly programs for
up to 196 switchings per week.
Easy to operate
Schedule an entire week with the press of a few buttons. Turn equipment
on today and off a week later. The controller will turn equipment on
and off in intervals as short as 1 minute or as long as 168 hours. The
day programs allow repeating the same cycle every day of the week,
weekdays only, weekends only, or any selected day.
Battery backup
A manual override permits equipment to be switched on or off without
disturbing the program. Program and clock times are maintained for 1
year by two silver-oxide backup batteries in the event of an electrical
outage. Brilliant, 1/2-inch-high LCD display shows the time of day,
day, and event number. LED light indicates the on/off status of
attached equipment.
Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable®
Certificate is provided from our ISO 17025 calibration laboratory
accredited by A2LA. It indicates traceability to standards provided by
NIST (National Institute of Standards and Technology). CSA-and
NTRL-C-rated, controls equipment to 125 VAC, 50/60 Hz, 15 amps, 1850
watts with a timing accuracy of 0.01%. High-impact ABS plastic case is
2-3/4 x 6 x 1-3/4 inches. Weight is 8-1/2 ounces. Replacement battery
Cat. No. 1039.
Control Cat. No. 5050
Traceable® Timer Switch Controller
|
