|
Traceable® Lab Controller Complete Description
Controls any appliance plugged into the back of the
controller.
In the time of day mode, it may be programmed for up to 224 on/off
switchings per day or up to 1568 switchings per week. In the countdown
mode, it turns on/off to the very second. In the repeat mode, it
continually cycles equipment on/off at any two unique time intervals
desired. A press of a key manually overrides the automatic settings.
Three unique timing modes
Three independent timing channels may be used to countdown and alarm,
count up (stopwatch mode), or countdown repeat (repetitively alarms at
a specific time interval). Times from 1 second to 100 hours. Alarms
sound and flash until manually stopped or may be set to automatically
turn off. Adjustable volume control permits loud to whisper-quiet
alarms.
Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable®
Certificate is provided from our ISO 17025 calibration laboratory
accredited by A2LA. It indicates traceability to standards provided by
NIST (National Institute of Standards and Technology).
Calculator channel has metric converter
The metric converter changes weights, liquid measurements, and
temperatures from metric to U.S. or vice versa. The calculator feature
adds, subtracts, multiplies, and divides on a six-digit display. The
clock displays the day of the week and time of day to the exact second.
Splash proof membrane keyboard is a delight to use.
Control Cat. No. 5010
Traceable® Lab Controller
| Performance Chart |
| Power |
125 VAC, 50/60 Hz, 3-pronged
grounded plug |
| Switching
Capability |
125 VAC,
50/60 Hz, 15 amps, 1875 watts |
| Timing Accuracy |
0.01 sec |
| Cycle
Duration |
Minimum 1
sec, Maximum 168 hr |
| On/Off Programs |
1568 per week, 224 per day |
| Display |
6-digit, 1/2
inch-high LED |
| Case |
Impact-resistant ABS plastic |
| Rating |
UL relay |
| Size |
6-1/2 x 4-3/4 x 3-1/2 inches |
| Weight |
2 pounds |
|
