|
Traceable® Humidity/Thermometer Complete
Description
Read humidity and temperature from 100 feet away
New Traceable® Radio-Signal Remote Humidity Meter/Thermometer
receives a radio signal from remote wireless sensors. It eliminates the
cable. Place the main unit at your desk or bench. Place the remote
sensor module in labs, ducts, and storage facilities-even outdoors.
Remote sensor sends humidity and temperature signals to the main
digital display. Transmits on a frequency of 433 MHz. Range is 65 to
100 feet, depending on the location or number of walls.
Traceable to NIST for accuracy
Relative humidity range is 25 to 90% with a resolution of 1% and an
accuracy of ±2% RH mid-range to ±4% RH elsewhere.
Switchable thermometer range is -4 to 140°F and -20 to 60°C,
with a resolution of 0.1° and an accuracy of ±1°C. To
assure accuracy an individually serial-numbered Traceable®
Certificate is provided from our ISO 17025 calibration laboratory
accredited by A2LA. It indicates traceability to standards provided by
NIST (National Institute of Standards and Technology).
Read up to three modules
Main unit can receive and display data from up to three different
remote sensor modules. Data is transmitted every 30 seconds. Display's
trend indicators show if humidity and temperature are rising or
falling. Minimum and maximum memory display allows monitoring of
conditions over short or long periods, including overnight or weekends.
An alarm may be set in increments of 1% RH and 1°. The alarm sounds
when the humidity or temperature exceeds the high and low set points.
Jumbo digits (1-1/8 inches high) may be read from 25 feet.
Cases are high-impact, chemical-resistant ABS plastic. Furnished with a
flip-open stand, wall brackets, and Velcro™ to attach to any surface.
Batteries operate continuously for eight months.
Supplied complete with Traceable® Certificate, one main
unit (4-1/4 x 4-1/2 x 3/4 inches, weight is 6 ounces), one remote
sensor module (2-1/3 x 3-1/2 x 3/4 inches, weight is 3 ounces),
internal humidity sensor, internal temperature sensor, and two AA
Replacement battery Cat. No. 1111 and two AAA alkaline batteries.
Replacement battery Cat. No. 1105.
Control Cat. No. 4380
Traceable® Humidity/Thermometer
Control Cat. No. 4381
Additional Traceable® Humidity/Thermometer Remote Sensor Module
May be set to channel 1, 2, or 3. Total of three modules may be used
with main unit
|
