|
Traceable® Memory/Waterproof Thermometer Complete
Description
<Waterproof data-log thermometer with alarm
Make those scribbled, hard-to-decipher records on scratch paper a thing
of the past. Traceable® ten-memory data-log waterproof thermometer
captures ten temperature readings, stores them in memory, and recalls
them on command. No paper needed. Covers 99 percent of routine
temperature measurements: –58 to 572°F and –50 to 300°C.
Resolution is 0.1° from –20 to 200° (1° outside this
range). Accuracy is ±1°C between –20 and 100°C. Reading
updates every second. Perfect for food, agricultural, petrochemical,
and pharmaceutical applications.
Features galore
Waterproof construction allows use in wet labs, wash-down areas, and
outside. Bold digits (1/2 inch high) are easy to read. Features include
°F/°C switch, minimum and maximum memory readings over any time
period, HOLD switch (freezes the display to capture temperature to
memory), and 10 memories. Both high and low audible alarm may be
programmed in 1° increments. Sounds 4 seconds every minute until
temperature returns to “in-range” reading or alarm-off is pressed.
Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable®
Certificate is provided from our ISO 17025 calibration laboratory
accredited by A2LA. It indicates traceability to standards provided by
NIST (National Institute of Standards and Technology). Stainless-steel
probe has a 1/4-inch diameter, 7-1/2-inch length, and 22-inch cable.
Cable stores in case. Shock-resistant ABS plastic case is 6-5/8 inches
high by 2-7/8 inches wide by 1-inch deep. Weight is 4 ounces.
Silver-oxide battery supplied. Replacement battery Cat. No. 1039.
Control Cat. No. 4373 Traceable®
Memory/Waterproof Thermometer
|
