|
Traceable® Dual-Display Conductivity Meter Complete
Description
Two displays simultaneously show conductivity readings and
temperature measurements. Measures conductivity in three ranges: 0.1 to
199.9 micromhos (0.1 micromho resolution), 0.001 to 1.999 millimhos
(0.001 millimho resolution), and 0.01 to 19.99 millimhos (0.01 millimho
resolution). Accuracy is ±(2% of full scale plus 1 digit).
Automatic and manual temperature compensation is 32.0 to 140.0°F
and 0.0 to 60.0°C. Resolution is 0.1 and accuracy is
±0.8°C.
To assure accuracy an individually serial-numbered
Traceable® Certificate is provided to indicate instrument
traceability to NIST (National Institute of Standards and Technology)
from our ISO 17025 calibration laboratory.
Calibrate using solution standards
Unit has a controller to adjust a probe's K (constant) factor and to
calibrate to solution standards. Easy-to-read, jumbo-size digits are
1-3/8 inches high. Serial RS-232 output allows connection to a computer
or data logger for monitoring and storing results. At the touch of a
button the instrument recalls highest, lowest, and average readings. A
data hold button "freezes" the display to capture readings.
Supplied complete
Unit is supplied with epoxy probe (cable length is 40 inches),
Traceable® Certificate, 9-volt alkaline battery, and serial
computer output. Size is 7 x 3 x 1-1/4 inches and weight is 9-1/2
ounces. Replacement battery Cat. No. 1112.
Control Cat. No. 4169
Traceable® Dual-Display Conductivity Meter
| Performance
Chart |
| Conductivity Ranges |
0.0 to 199.9 micromhos
0.001 to 1.999 millimhos
0.01 to 19.99 millimhos
|
| Accuracy |
±(2% of full scale plus 1 digit) |
| Temperature Ranges |
32.0 to 140 °F
0.0 to 60.0 °C |
| Temperature Resolution |
0.1 |
| Temperature Accuracy |
0.8°C |
| Cat. No. |
Accessories |
| 4136 |
Data
Acquisition System- Complete DAS–3™ Data
Acquisition System captures, displays, and stores readings on any
IBM-compatible PC. Information can be imported into databases. Diskette
(3.5 inches) and 5-foot serial cable with D9F plug. |
| 4325 |
Data Logger- Complete DAS–4™
System captures and stores up to 8000 bytes (over 1000 readings).
Readings may be taken at intervals from 1 second to 99 hours. Stored
readings may be downloaded to any PC and viewed. Can be read as-is or
imported to spreadsheets, databases, and statistical programs. Supplied
complete with 36-inch serial cable with D9F computer plug, 3.5-inch
diskette Windows®, and four AA alkaline batteries. Size is 5 x 3 x
1 inches. Weight is 7 ounces. For use with Traceable® meters
featuring RS-232 output.
|
| 4138 |
Easy-Use Adapter 115 VAC |
|
