|
pH/Conductivity Universal Flow-Thru Adaptor Complete
Description
Flow-through adaptor is universally designed to accept all
1/2-inch (12 mm) diameter conductivity probes and pH electrodes. Allows
constant monitoring of flowing fluids with a standard dip probe. Two
O-rings provide a secure, leakproof seal.
Connectors accept tubing with a 1/16-, 3/32-, 1/32- and
1/8-inch inside diameter. Cell volume depends on the positioning of the
probe (approximately 2 to 4 ml). Flow rate may be from 0.001 to 50
milliliters per minute. Constructed of teflon (universally chemically
inert), it may be in constant use at temperatures from -100 to
+500°F. Size is 1-inch diameter x 2-1/4 inches.
Control Cat. No. 4167
pH/Conductivity Universal Flow-Thru Adaptor
|
