|
Traceable® Portable Conductivity Meter Complete
Description
Quick answers, accurate results on demand
Measuring conductivity quickly doesn’t mean sacrificing accurate
results or product purity. In an instant, Portable Conductivity Meter
automatically selects the proper range and displays the exact answer
without hassles. This auto-ranging feature may be turned off to
accommodate user-entered ranges. All special calibration data is saved
even when unit is turned off. Fulfills all government measurement
requirements plus CAP, ASTM, NCCLS, and ACS.
Range in micromhos (microsiemens) is 0.01 to 200,000, in
megohms is 0.001 to 20.000, range in dissolved solids/parts per million
is 0.1 to 20,000, and in salinity is 2.0 to 42.0 (oceanographic units).
Accuracy is ±0.3%. Stores four calibration settings.
Four calibration points may be entered into memory
utilizing solution standards
Results are displayed in conductivity (micromhos/cm and
microsiemens/cm), resistivity (megohms), dissolved solids (parts per
million), concentration (user-specified units), salinity (oceanographic
units), and temperature (°F/°C).
Supplied instant-response probe contains platinum electrodes
that deliver highly accurate readings. Internal solid-state thermistor
(for automatic/manual temperature compensation) permits all readings to
be referenced to the international standard of 25°C. Temperature
compensation is automatic (2% per °C), user-designated (0.000 to
5.000% per °C), or absolute. K-factor may be adjusted to match each
probe. Exclusive “temperature compensation disable function” fulfills
USP-NF (United States Pharmacopoeia, National Formulary, 645
Conductivity Measurement) requirement.
Use to check the purity of water from stills and
demineralizers, to analyze seawater, and to make up solutions. Simply
turn on, insert probe, and read–easiest unit ever designed for routine
analysis, quality control, and research. Elimination of “operator
technique” permits everyone in the lab to report identical readings.
Tough, chemical-resistant ABS plastic housing assures a long life in
severe lab or harsh plant environments. Large 1/2-inch-high LCD digits
are easy to read.
Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable®
Certificate is provided from our ISO 17025 calibration laboratory
accredited by A2LA. It indicates traceability to standards provided by
NIST (National Institute of Standards and Technology).
Permanent hard copy record
Recorder jack allows continuous monitoring and a permanent record.
Adjustable control allows unit to be calibrated to solution standards.
Glass Probe is 5-1/4 x 1/2 inches in diameter with a cable length of 59
inches. Unit size is 3-3/4 x 6-3/4 x 1-1/2 inches. Weight is 16 ounces.
Battery is supplied. Replacement battery Cat. No. 1112.
Control Cat. No. 4063
Traceable® Portable Conductivity Meter
| Performance
Chart |
Ranges in Micromhos
Microsiemens |
0.01 to 20.000
0.1 to 200
1 to 2000
10 to 20000
100 to 200000 |
| Ranges in Megohms |
0.001 to 2.000
0.01 to 20.00 |
| Ranges in Dissolved Solids/Parts Per Million |
0.1 to 20.0
1 to 200
10 to 2000
100 to 20000
|
| Meter Accuracy, 0.1 to 1999 Micromhos |
± 0.3% |
| Cat. No. |
Accessories |
| 4062 |
Replacement Conductivity Probe- Glass, K=1
Probe range is from 0.05 to 200,000 micromhos.
|
| 4061 |
Accessory Conductivity Probe- Unbreakable
Epoxy, K=1
Probe range is from 1.0 to 200,000 micromhos.
|
| 4054 |
Accessory Conductivity Glass Flow-Through
Cell- with volume of 4 ml, K=1 |
| 4055 |
Accessory Micro-Sampler/Flow-Through Cell
with volume of 2 ml, K=0.2 |
|
