|
Traceable® Digital Thermometer Complete
Description
Affordable routine thermometer now has extra features
At the touch of a button, display temperatures from –58.0 to
500.8°F and –50.0 to 260.0°C; switch from °F to °C; or
set high/low alarms.
Ideal for all solutions
This is the thermometer to use in foods, soils, cuvets, water baths,
wastewater, and incubators. Resolution is 0.1° and accuracy is
±1°C.
Always-on monitoring
Thermometer monitors temperature around the clock. Never again worry
about leaving unit on—it’s always on. There isn’t even an off switch.
Single battery runs continuously for 1 year. One-half-inch high display
is readable from 10 feet.
High/Low alarms
Thermometer automatically “watches” solutions. Both a high and low
alarm may be programmed in 1° increments.
When temperature rises above or falls below set points, a
1-minute audible alarm signals an out-of-range condition. Alarm
automatically resets when temperature returns to “in range” reading.
Alarm mode may be switched off when not required.
Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable®
Certificate is provided from our ISO 17025 calibration laboratory
accredited by A2LA. It indicates traceability for temperature only to
standards provided by NIST (National Institute of Standards and
Technology). Probe clips to unit for handy storage. Stainless steel
probe has a diameter of 0.14 inch, a length of 7-1/4 inches, and a
cable length of 3 feet. Size is 2 x 4 x 1/2 inches and weight is 3
ounces. Comes with flip-open stand for bench use. Supplied complete
with probe, AAA battery, and Traceable® Certificate. Replacement
battery Cat. No. 1105.
Control Cat. No. 4045 Traceable®
Digital Thermometer
|
